Find the right
set-out tool.

Rafter length, rise, birdsmouth and live cutting diagram.

Even risers, total run, stringer marks and headroom.

Centers, clear gaps and a running mark-out list.

Slab volume, order quantity, weight and cost.

Best fit, equal edge cuts, joints and tile quantity.

Circumference, chord, segment angle and full diagram.

Convert common site lengths without changing screens.

Move between angle, percent grade and pitch ratios.

Datum levels, design falls and cut-or-fill set-out at every station.

Inverts, falls, rolling offsets, fitting angles and true travel.

Offsets, saddles, shrink and mark positions for accurate bends.

Fit panels, battens or tiles to a real opening that is not perfectly square.

Plan rafters, hips, jacks and material lengths.

Gable dimensions, rafters, ridge and cutting list.

Single-pitch roof rise, run and rafter set-out.

Two-pitch gambrel frame geometry and joints.

Asymmetric roof frame and rafter dimensions.

Full-scale plumb, seat and side-cut templates.

Horizontal soffit, fascia and drop geometry.

Sheet layout and diagonal cutting dimensions.

Curved roof sheet length and pitch transition.

Tread rotation, rise and central column geometry.

Spine set-out, brackets and tread positions.

Equal baluster gaps and on-tread positions.

Angled wall panels and diminishing heights.

Equal field spacing for any wall length.

Panel widths, gaps and post positions.

Balanced panels, rails and stile marks.

Even openings with material thickness included.

Studs, noggins and plate quantities.

Stud centers around doors and windows.

Kerf count, spacing and remaining web.

Bar counts, centers, lengths and weight.

Balanced running marks for fixings.

Polygon slab, thickened edges and reinforcement.

Blocks by wall area, courses and openings.

Circular wall radius, unit angle and joint taper.

Arch voussoir layout and cut dimensions.

Block core alignment and starter positions.

Course gauge, joint size and bond set-out.

Printable branch-to-tube coping pattern.

Angled end miter wrap template.

Hole profile through sloped sheet material.

Bend allowance, tangent points and set-out.

Segment count, cut angle and developed length.

Transition panels and full-scale patterns.

Miter layout for equal or different sections.

Compound corner joining templates.

Printable custom-size degree protractor.

Equal divisions, chords and cutting angles.

Full-scale circle across tiled print pages.

Large-radius printable arc set-out.

Printable true ellipse and oval layouts.

Flat development for frustums and cones.

Equal hole positions and drill template.

Wraparound tape that reads diameter directly.

Stumps, bearers, joists and board estimate.

Board count, gaps, cuts and cost.

Post centers, panel widths and quantities.

Individual paling heights along an arc.

Rail joins, post positions and paling count.

Polygon gazebo rafters, floor and plan geometry.

Metric, imperial and decimal lengths.

Square units, hectares and acres.

Cubic units and liquid measures.

Common workshop and construction weights.

Recover real dimensions from a known feature.

Fraction wheel and decimal equivalents.

Device angle and rise-over-run level.

Rectangle diagonals and corner verification.

Generate related golden-section dimensions.

Slant, edge and face dimensions.

Pointed arch centers and radius layout.

Segment widths and miter angles for curved trim.

Brace length, cut angle and offsets.

Blade and bevel settings from included angles.

Build a rectilinear floor and total its area.

Tile, box, waste and budget estimate.

Courses, overlap, quantities and cost.

Ring counts, cuts and paving quantities.

Convert section and length to material volume.

Price per thousand board feet and per piece.

Every diminishing stud under a gable with its cut angle.

Member lengths along a sloping line with a constant step.

One continuous tape reading for a repeating module.

Balanced drill centres inside the end margins.

Square or staggered planting counts and row offsets.

Stump grid from maximum bearer and stump spans.

Every side and angle from any two known values.

Angles, area and altitudes from three sides.

Sides, across flats, area and the miter to build it.

Chord, arc, rise and segment area for any sweep.

Convert decimal degrees, DMS, radians and grade.

Bags of premix for a pour, by bag yield and waste.

Round or rectangular column and pad volumes.

Concrete per hole with post displacement removed.

Wall units, courses, base gravel and drainage.

Dig volume, bulking factor and truck loads.

Base course tonnage with compaction allowance.

Mortar volume split into sand and cement bags.

Partial volume of a tank on its side, plus dip chart.

Upright cylinder capacity and volume per unit depth.

Trough or tank capacity with a dip chart.

Driven speed, belt length and wrap angles.

Chain links, pitch diameters and drive ratio.

Cutting speed, spindle RPM and feed rate.

Evenly spaced tails, pins and end-grain marks.

Tenon on the one-third rule with matching mortise.

Miter and bevel for crown cut flat on the saw.

Measured corner angle to the saw setting each side.

Brace length and both cut angles from drop and run.

Litres and cans by area, coats and spread rate.

Sheets, screws, tape and stopping compound.

Sheet count, cut lengths, laps and fixings.

Batt and pack counts sized to the frame bays.

Trim lineal after openings, with mitre counts.